Calculator
How it works
La Legge di Ohm stabilisce che la corrente I che attraversa un conduttore ohmico è direttamente proporzionale alla tensione V applicata e inversamente proporzionale alla resistenza R: I = V/R. La potenza dissipata per effetto Joule è P = V × I = V²/R = I²×R.
Assumptions and conditions
This calculation is valid under the following conditions:
- Conduttore ohmico lineare
- Regime stazionario (DC o AC a frequenza tale da trascurare induttanza e capacità)
- Temperatura costante (resistività non varia con T nel calcolo)
This calculation is valid when: Conduttore ohmico lineare; Regime stazionario (DC o AC a frequenza tale da trascurare induttanza e capacità); Temperatura costante (resistività non varia con T nel calcolo).
This is an informational calculation (unit conversion or physical definition). The margin of error is negligible if inputs are correct.
All inputs and outputs use SI units. Convert any values in other unit systems before entering them.
Limitations
This calculation does not apply in the following cases:
- Non valido per semiconduttori, archi elettrici, plasma
- Per AC con componente reattiva significativa usare legge di Ohm complessa (impedenza Z)
- La resistenza varia con la temperatura: R(T) = R₀ × [1 + α × (T - T₀)]
Non valido per semiconduttori, archi elettrici, plasma
Per AC con componente reattiva significativa usare legge di Ohm complessa (impedenza Z)
La resistenza varia con la temperatura: R(T) = R₀ × [1 + α × (T - T₀)]
Referenced standards
- IEC 60050-131 Vocabolario Elettrotecnico Internazionale
Formula source: Georg Simon Ohm, 'Die galvanische Kette, mathematisch bearbeitet', 1827. Formulazione moderna: IEC 60050-131
Application examples
Circuito resistivo 230 V, 100 Ω
Circuito resistivo semplice alla tensione di rete monofase italiana
Circuito SELV 24V, 12 Ω
Circuito a bassissima tensione di sicurezza (SELV) secondo CEI 64-8
Frequently asked questions
What does the Ohm's Law Calculator calculator compute?
Calculate voltage, current, or resistance using Ohm's Law (V = R × I). Applicable to linear resistive conductors in DC or quasi-steady-state AC.
When is this calculation valid?
This calculation is valid under the following conditions: Conduttore ohmico lineare; Regime stazionario (DC o AC a frequenza tale da trascurare induttanza e capacità); Temperatura costante (resistività non varia con T nel calcolo).
When is this calculator not appropriate?
Non valido per semiconduttori, archi elettrici, plasma Per AC con componente reattiva significativa usare legge di Ohm complessa (impedenza Z) La resistenza varia con la temperatura: R(T) = R₀ × [1 + α × (T - T₀)]
How accurate is the result?
This calculator implements the standard form of the formula. Accuracy depends on the quality of the inputs provided. Source: Georg Simon Ohm, 'Die galvanische Kette, mathematisch bearbeitet', 1827. Formulazione moderna: IEC 60050-131.
What is the source of the formula?
Georg Simon Ohm, 'Die galvanische Kette, mathematisch bearbeitet', 1827. Formulazione moderna: IEC 60050-131 Referenced standards: IEC 60050-131 Vocabolario Elettrotecnico Internazionale.
Which parameter has the greatest influence on the result?
"Tensione (V)" is the most influential parameter: a 10% change in this input produces approximately 21% change in "Potenza dissipata (W)".
How does the result change under different conditions?
Comparison between "Reference conditions" and "Circuito SELV 24V, 12 Ω": Corrente calcolata (A) [A]: decreases by 13.0% (from 2.300 to 2.000). Potenza dissipata (W) [W]: decreases by 90.9% (from 529.000 to 48.000). Resistenza calcolata (Ω) [Ω]: decreases by 88.0% (from 100.000 to 12.000).
Technical note
La Legge di Ohm è valida solo per resistori lineari (materiali ohmici). Diodi, transistor, lampade ad incandescenza (a caldo) hanno comportamento non-ohmico.
Technical note
Legame con la potenza: P = V × I = V²/R = I²×R. Le tre forme sono equivalenti e si usano a seconda delle grandezze note.
Technical note
Effetto Joule: la potenza dissipata come calore è P = I²×R. Questo è il principio di funzionamento di resistenze riscaldanti, fusibili e il limite di portata dei cavi.
Technical deep dive
About this calculator
Calculate voltage, current, or resistance using Ohm's Law (V = R × I). Applicable to linear resistive conductors in DC or quasi-steady-state AC.
Formula
I = V / R | P = V × I | R = V / I
Validity conditions
This calculation is valid under the following conditions:
- Conduttore ohmico lineare
- Regime stazionario (DC o AC a frequenza tale da trascurare induttanza e capacità)
- Temperatura costante (resistività non varia con T nel calcolo)
Result sensitivity
The result varies significantly with changes in the following parameters:
- Tensione (V) [V]: superlinear sensitivity on "Potenza dissipata (W)" (proportional, elasticity 2.10).
- Resistenza (Ω) [Ω]: linear sensitivity on "Resistenza calcolata (Ω)" (proportional, elasticity 1.00).
When this calculator does not apply
- Non valido per semiconduttori, archi elettrici, plasma
- Per AC con componente reattiva significativa usare legge di Ohm complessa (impedenza Z)
- La resistenza varia con la temperatura: R(T) = R₀ × [1 + α × (T - T₀)]
Technical notes
- La Legge di Ohm è valida solo per resistori lineari (materiali ohmici). Diodi, transistor, lampade ad incandescenza (a caldo) hanno comportamento non-ohmico.
- Legame con la potenza: P = V × I = V²/R = I²×R. Le tre forme sono equivalenti e si usano a seconda delle grandezze note.
- Effetto Joule: la potenza dissipata come calore è P = I²×R. Questo è il principio di funzionamento di resistenze riscaldanti, fusibili e il limite di portata dei cavi.
Technical analysis
Method: Calculate voltage, current, or resistance using Ohm's Law (V = R × I). Applicable to linear resistive conductors in DC or quasi-steady-state AC.
Reference result: Corrente calcolata (A): 2.300 A, Potenza dissipata (W): 529.000 W.
Sensitivity analysis
Elasticity: percentage change in output relative to percentage change in input (1.0 = linear).
| Input | Primary output | Elasticity | Relationship |
|---|---|---|---|
| Tensione (V) [V] | Potenza dissipata (W) | 2.10 | superlinear |
| Resistenza (Ω) [Ω] | Resistenza calcolata (Ω) | 1.00 | linear |
| Corrente (A) [A] | Corrente calcolata (A) | 0.00 | negligible |
Note: The result is particularly sensitive to "Tensione (V)" [V]: a 10% change produces approximately 21% change in "Potenza dissipata (W)".
Related calculators
Need a custom calculation?
If the standard parameters don't cover your case, we can help with a tailored calculation.