Calculator
How it works
La corrente di regime si ricava invertendo la formula della potenza attiva monofase P = V × I × cosφ. La corrente così calcolata è la corrente nominale del carico in condizioni di regime stazionario. Per il dimensionamento dei cavi è necessario applicare ulteriori coefficienti secondo CEI 64-8.
Assumptions and conditions
This calculation is valid under the following conditions:
- Sistema monofase
- Carichi lineari
- cosφ costante in regime stazionario
This calculation is valid when: Sistema monofase; Carichi lineari; cosφ costante in regime stazionario.
The result is indicative. Verify against applicable codes and standards with a licensed professional before applying to a real project.
All inputs and outputs use SI units. Convert any values in other unit systems before entering them.
Limitations
This calculation does not apply in the following cases:
- Corrente calcolata è la corrente di regime — per dimensionamento cavi aggiungere coefficienti di posa e temperatura secondo CEI 64-8 Tab. 52
Corrente calcolata è la corrente di regime — per dimensionamento cavi aggiungere coefficienti di posa e temperatura secondo CEI 64-8 Tab. 52
Referenced standards
- CEI 64-8:2021 Impianti elettrici a bassa tensione
- IEC 60364-5-52
Formula source: Deriva dalla definizione P = V × I × cosφ. CEI 64-8 Parte 52.
Application examples
Presa domestica 2000 W a 230 V
Carico domestico tipico (forno a microonde, lavatrice) a cosφ = 0.9
Condizionatore 3500 W monofase
Condizionatore split residenziale con cosφ tipico di 0.85
Frequently asked questions
What does the Current from Single-Phase Power calculator compute?
Derive phase current from single-phase active power and voltage: I = P / (V × cos φ). For load sizing and cable selection.
When is this calculation valid?
This calculation is valid under the following conditions: Sistema monofase; Carichi lineari; cosφ costante in regime stazionario.
When is this calculator not appropriate?
Corrente calcolata è la corrente di regime — per dimensionamento cavi aggiungere coefficienti di posa e temperatura secondo CEI 64-8 Tab. 52
How accurate is the result?
This calculator implements the standard form of the formula. Accuracy depends on the quality of the inputs provided. Source: Deriva dalla definizione P = V × I × cosφ. CEI 64-8 Parte 52..
What is the source of the formula?
Deriva dalla definizione P = V × I × cosφ. CEI 64-8 Parte 52. Referenced standards: CEI 64-8:2021 Impianti elettrici a bassa tensione, IEC 60364-5-52.
Which parameter has the greatest influence on the result?
"Potenza attiva (W)" is the most influential parameter: a 10% change in this input produces approximately 10% change in "Corrente di regime (A)".
How does the result change under different conditions?
Comparison between "Reference conditions" and "Condizionatore 3500 W monofase": Corrente di regime (A) [A]: increases by 85.3% (from 9.662 to 17.903).
Technical note
Per il dimensionamento del cavo, la corrente di progetto I_B deve rispettare I_B ≤ I_n (protezione) ≤ I_z (portata cavo) secondo CEI 64-8 Sez.433.
Technical note
La portata del cavo I_z dipende dalla sezione, dal tipo di cavo (PVC/XLPE) e dal metodo di posa (CEI 64-8 Tab. 52C).
Technical note
Per carichi con elevata corrente di spunto (motori), considerare la corrente di avviamento nella scelta delle protezioni.
Technical deep dive
About this calculator
Derive phase current from single-phase active power and voltage: I = P / (V × cos φ). For load sizing and cable selection.
Formula
I = P / (V × cosφ)
Validity conditions
This calculation is valid under the following conditions:
- Sistema monofase
- Carichi lineari
- cosφ costante in regime stazionario
Result sensitivity
The result varies significantly with changes in the following parameters:
- Potenza attiva (W) [W]: linear sensitivity on "Corrente di regime (A)" (proportional, elasticity 1.00).
- Tensione (V) [V]: linear sensitivity on "Corrente di regime (A)" (inversely proportional, elasticity -0.91).
- Fattore di potenza (cosφ) [cosφ]: linear sensitivity on "Corrente di regime (A)" (inversely proportional, elasticity -0.91).
When this calculator does not apply
- Corrente calcolata è la corrente di regime — per dimensionamento cavi aggiungere coefficienti di posa e temperatura secondo CEI 64-8 Tab. 52
Technical notes
- Per il dimensionamento del cavo, la corrente di progetto I_B deve rispettare I_B ≤ I_n (protezione) ≤ I_z (portata cavo) secondo CEI 64-8 Sez.433.
- La portata del cavo I_z dipende dalla sezione, dal tipo di cavo (PVC/XLPE) e dal metodo di posa (CEI 64-8 Tab. 52C).
- Per carichi con elevata corrente di spunto (motori), considerare la corrente di avviamento nella scelta delle protezioni.
Technical analysis
Method: Derive phase current from single-phase active power and voltage: I = P / (V × cos φ). For load sizing and cable selection.
Reference result: Corrente di regime (A): 9.662 A.
Note: Technical support tool. Results do not replace design verification by a licensed professional engineer.
Sensitivity analysis
Elasticity: percentage change in output relative to percentage change in input (1.0 = linear).
| Input | Primary output | Elasticity | Relationship |
|---|---|---|---|
| Potenza attiva (W) [W] | Corrente di regime (A) | 1.00 | linear |
| Tensione (V) [V] | Corrente di regime (A) | -0.91 | linear |
| Fattore di potenza (cosφ) [cosφ] | Corrente di regime (A) | -0.91 | linear |
Note: The result is particularly sensitive to "Potenza attiva (W)" [W]: a 10% change produces approximately 10% change in "Corrente di regime (A)".
Related calculators
Need a custom calculation?
If the standard parameters don't cover your case, we can help with a tailored calculation.